The 0.5mm Pitch 24 Pin Right Angle SMT FPC Connector provides a compact PCB-to-flexible-circuit interface for electronic assemblies requiring 24 signal positions and horizontal cable entry.
Its 0.5mm contact pitch supports higher connection density, while the right-angle surface-mount configuration allows the FPC to enter parallel to the PCB. The connector is rated at 0.5A and 50V AC/DC, with an operating temperature range of -40°C to +105°C.
MTCONN supplies this model for OEM, EMS, contract manufacturing and distributor purchasing programs. Samples, technical drawings, production quotations and recurring bulk order support are available.
For additional contact counts and mounting configurations, explore our complete FPC connector range.
Argument
Housing Material /Color | LCP ULPA9T/Beign |
Cover Material | LCP/Black |
Terminal Material | Copper C5191 |
Fitting Nail | Copper C2680 |
Pitch | 0.5mm |
Number of Contacts | 4~60 Pin |
Rating Current | 0.5A |
Voltage Rating | 50V AC/DC |
Insulation Resistance | 500MΩ MIN |
Contact Resistance | 20MΩ MAX |
Voltage Resistance | AC 200V for 1 Minite |
Temperature | - 40°C ~ + 105°C |
The connector combines a 0.5mm pitch with 24 electrical contact positions. This configuration supports compact PCB layouts that require multiple signal paths within a controlled connector width.
Engineering teams should verify the FPC pitch, exposed conductor dimensions and contact orientation before approving the connector for production.
The right-angle structure allows the flexible circuit to enter parallel to the PCB. This arrangement can simplify cable routing in equipment where vertical clearance is limited or where the FPC must run along the board surface.
This structure distinguishes the product from MTCONN’s vertical 24-position FPC connector options.
The connector is designed for surface-mount installation. Before production approval, confirm the PCB land pattern, solder joint layout, fitting-nail positions and recommended reflow profile against the approved drawing.
The specified 5.2mm height provides a reference for enclosure clearance, adjacent component placement and FPC routing. Allow sufficient space for cable insertion and cover operation during assembly.
The terminals use C5191 copper alloy, while the fitting nails use C2680 copper alloy. These components form the electrical contact and mechanical PCB retention structure.
This 24 position FPC connector is rated for:
0.5A rated current
50V AC/DC rated voltage
500MΩ minimum insulation resistance
20mΩ maximum contact resistance
200V AC dielectric withstand voltage for one minute
-40°C to +105°C operating temperature
Final suitability must be evaluated according to the actual circuit, PCB design, FPC construction and operating environment.
The current product description uses “Positive Position,” but overseas connector specifications normally identify the mating contact as top contact or bottom contact.
Before selecting this connector, confirm:
Whether the exposed FPC conductors face upward or downward
Whether the connector uses top or bottom contacts
The FPC insertion direction
The cover or locking operation
The required FPC thickness
The PCB pad arrangement
The contact position should be shown clearly in the drawing, specification table and product title after technical confirmation.
Matching the pitch and contact count is only the first step. Review the following details before approving samples or releasing a bulk order:
| Selection Item | Requirement to Confirm |
|---|---|
| FPC pitch | 0.5mm |
| Number of positions | 24 |
| FPC thickness | Confirm against the product drawing |
| Exposed conductor dimensions | Check width, length and spacing |
| Contact location | Confirm top contact or bottom contact |
| Cable entry | Right-angle, parallel to PCB |
| PCB mounting | SMT |
| PCB footprint | Verify pad dimensions and fitting-nail locations |
| Connector height | 5.2mm |
| Reflow requirements | Confirm the approved soldering profile |
| Packaging | Confirm tray, tube or tape-and-reel requirements |
| Electrical load | Maximum 0.5A and 50V AC/DC within approved conditions |
Send your FPC drawing and PCB footprint with the sample request so that the intended interface can be reviewed before production.
The 0.5mm pitch 24 pin right-angle FPC connector can be evaluated for internal board-to-flexible-circuit connections in the following equipment.
The 24-position interface can connect a main PCB with a display, touch interface, control panel or operator module where the flexible circuit runs parallel to the board.
It can be evaluated for controllers, monitoring devices, operator interfaces and compact industrial electronics requiring a right-angle FPC connection.
The 0.5mm pitch and 24-position layout can support signal connections between internal communication boards, interface modules and display assemblies.
The connector may be used in appliances, smart devices and other electronic equipment requiring a compact internal flexible-circuit interface.
Its specified -40°C to +105°C operating range supports evaluation for selected electronic modules. Application-specific qualification must be completed according to the customer’s operating conditions and automotive requirements.
This connector can also be evaluated for display, sensing and control-board connections in medical or test equipment. Required quality and regulatory conditions should be defined during project review.
MTCONN supports connector projects from engineering evaluation through recurring mass production. Our operations integrate product design, mold development, stamping, injection molding, assembly and inspection.
With more than 200 employees, over 5,000 square meters of workshop space and 68 sets of automated production equipment, MTCONN supports OEMs, EMS companies, module manufacturers and distributors that require scheduled connector supply.
Learn more about our connector manufacturing capabilities.
Samples can be arranged for dimensional verification, FPC matching, PCB assembly trials and electrical evaluation. The typical sample lead time is 5–7 days, subject to product availability and project requirements.
The typical lead time for production orders is approximately 3–4 weeks, depending on order quantity, material availability, packaging and production scheduling.
Customers planning recurring purchases should provide:
Trial order quantity
Regular batch quantity
Estimated annual demand
Required delivery frequency
Target delivery date
Shipping destination
This information supports material planning, production scheduling and volume pricing review.
Available testing support includes:
Continuity testing
Insulation resistance testing
Withstand-voltage testing
Salt-spray testing
Thermal-shock testing
Dimensional and appearance inspection
Testing conditions and acceptance criteria should be confirmed before order placement.
For volume purchasing programs, MTCONN can discuss:
Anti-static and moisture-resistant packaging
Packaging suitable for production-line handling
Customer-specific labels
Barcode identification
Batch traceability
Defined packing quantities
Export carton requirements
Packaging format should be confirmed according to the customer’s SMT assembly and inventory-management process.
If the standard MTFP65-824GWN-48A01 does not match your PCB, FPC or equipment layout, MTCONN can review customized connector requirements.
Our OEM and ODM connector services support:
Different contact counts
Housing and cover material selection
Contact orientation review
Terminal and fitting-nail requirements
Contact plating options
Packaging and labeling customization
Technical drawing and PCB footprint support
Sample development and project testing
Custom requirements are subject to engineering feasibility, tooling requirements and projected order volume.
If the current 5.2mm right-angle connector does not match your mechanical layout, consider these alternative configurations:
For vertical cable entry, review the 0.5mm Pitch 24 Pin Vertical Pull SMT FPC Connector.
For a lower-profile front-lock design, review the 0.5mm Pitch 24 Pin Front Lock FPC Connector.
These pages target different mounting structures and should be selected according to cable direction, available height, contact location and locking method.
Yes. Samples can be provided for engineering and quality evaluation. The typical sample lead time is 5–7 days, subject to availability.
Yes. Send the batch quantity, annual demand and delivery schedule to request volume pricing and production planning support.
Contact count, materials, contact plating, structure, packaging and labeling requirements can be reviewed for OEM projects. Customization depends on technical feasibility and projected volume.
If you are sourcing a 0.5mm Pitch 24 Pin Right Angle SMT FPC Connector for an OEM product, EMS assembly program or recurring distribution order, send MTCONN your FPC drawing, PCB footprint, order quantity and annual forecast.
Our team will review the specification and provide sample availability, volume pricing and an estimated production schedule.
Request a Sample | Get Bulk Pricing | Discuss an OEM Project
Related Products
Tell us what products you need.
We're here to help and will respond quickly!
Telephone:
+86 769 2305 0865
WeChat:
+86 135 4374 6930 (Jeremy)
+86 134 2479 8678 (Paul)
WhatsApp:
E-mail:
